Welcome to the world’s most advanced solar EVA product directory. Panel manufacturers can use our advanced technical filters to find the exact solar encapsulant that match their needs. We have collated EVA data from manufacturers from all around the world into a common template, allowing you to compare and review EVA films easily.
Type: | Ultra Fast Cure | Tensile Strength: | 16 MPa |
Thickness: | 0.30 ~ 0.80 mm | Thermal Shrinkage (Length / MD) ≤: | 3 % |
Region: | India |
Type: | Standard Cure | Tensile Strength: | -- |
Thickness: | -- | Thermal Shrinkage (Length / MD) ≤: | -- |
Region: | China |
3M white film, High reflectivity helps increasing power efficiency especially for single glass & double glass module. Meanwhile, it plays an important role in improving the module CTM, increasing the power output, especially for double glass modules.
Type: | Standard Cure | Tensile Strength: | -- |
Thickness: | 0.46 mm | Thermal Shrinkage (Length / MD) ≤: | -- |
Region: | Netherlands |
Type: | Fast Cure | Tensile Strength: | 7 MPa |
Thickness: | -- | Thermal Shrinkage (Length / MD) ≤: | -- |
Region: | Korea |
Type: | Fast Cure | Tensile Strength: | 11 MPa |
Thickness: | -- | Thermal Shrinkage (Length / MD) ≤: | -- |
Region: | Korea |
Type: | Standard Cure | Tensile Strength: | 16 MPa |
Thickness: | -- | Thermal Shrinkage (Length / MD) ≤: | 2 % |
Region: | China |
• Different types of EVA film available: highly transparent, high UV cutoff, and highly reflective white
• Excellent weather resistance against high temperature, high humidity, and ultraviolet radiation
• Good adhesion between glass and different types of back films
• Low shrinkage to ensure component stability during lamination
Type: | Fast Cure | Tensile Strength: | 18 MPa |
Thickness: | 0.2 ~ 0.8 mm | Thermal Shrinkage (Length / MD) ≤: | 3 % |
Region: | China |
Thermoplastic adhesive film tpo
Has the advantages of low packaging temperature and low water vapor transmission rate
Maintains excellent weather resistance and good adhesion
Can be widely used for the packaging of perovskite batteries and thin film battery modules
Type: | Standard Cure | Tensile Strength: | -- |
Thickness: | -- | Thermal Shrinkage (Length / MD) ≤: | -- |
Region: | China |
√ High Transmittance,Higher Power Output
√ Thermosetting,No Creep, Especially Suitable for Glass-Glass Modules
√ No Acetic acid,No corrosion , Long Lasting Power Output
√ First choice encapsulant films for type N or P double-sided cells
√ Lower MVTR,Excellent Damp-Heat Stability
√ High Compatibility ,Good Capacity with c-Si, Cd-Te & CIGS Modules
Type: | Ultra Fast Cure | Tensile Strength: | 6 MPa |
Thickness: | -- | Thermal Shrinkage (Length / MD) ≤: | 3 % |
Region: | China |
PO II FLIM (CO-556)
• Excellent durability (including high resistance for temperature, humidity and UV)
• Excellent adhesion after aging test.
• Easy for processing and quality stable during laminating.
• Low shrinkage rate, to make sure the stable quality during laminating.
• Can be used for G to G solar module, normal solar module and thin film solar module.
Type: | Standard Cure | Tensile Strength: | -- |
Thickness: | 0.46 mm | Thermal Shrinkage (Length / MD) ≤: | -- |
Region: | Netherlands |